top of page

Interior & exterior use Water based pre-grout treatment.  Protects against surface grout residue without altering the paving characteristics.


  • For use on all types of textured porcelain tile surfaces.
  • Helps with grout and jointing compound release.
  • On exterior surfaces a further coat can be applied after grouting, which will help with the removal of everyday stains from organic matter.


Directions for use:


SHAKE WELL BEFORE USE. Always test on an inconspicuous area prior to general application.

Preparation: Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of Pavestone Patio Cleaner 1:5 Rinse well to remove residues and leave to dry


Application: Before grouting apply evenly to the surface using a broad paint brush, foam roller or light pressure sprayer. Allow to dry for 30 minutes. Apply a second coat. Leave to cure for a minimum of 1 hour before grouting or pointing.  Once pointing is dry and all residues have been removed a further coat of protector can be applied covering the joints as well.


Hard to remove dried on cement stains can be removed using Pavestone Cement & Grout Residue Remover.

Hard to remove stains from jointing compounds can be removed using Pavestone Resin residue remover.

Coverage per coat: 1 Litre - Lower porosity surfaces 30 m�

Porcelain Tile Protector - 1 litre

SKU: 10001220
  • Cleaner

  • Pavestone

bottom of page